How to Mount a Monitor
A table or a desk is used to support the monitor during use. However, some conditions might force you to mount your computer to the wall. The procedure on how to mount a personal computer is not familiar to most people. Mounting your monitor to the wall is a simple task especially if you own a liquid crystal monitor. You can have your monitor installed and ready for use within an hour after purchasing a mount. Today, most institutions of higher learning prefer the use of computer projection in their programs, and mounted PC are a brilliant idea. Overheating is not common after mounting your monitor as the open place facilitation good air circulation. The base material used to make a wall mounted PC can be steel, plastic or wood.
To mount your personal computer to the wall, you need to read this article as it explains the procedure and tips that you should follow. Weight, size and mountability are essential factors to consider when choosing base material for a custom wall mounted PC. First, you have to determine the exact place on the wall where you are going to mount your monitor. To be able to connect to the monitor effectively, ensure that you place the monitor at a place that is closer to the CPU and that it is accessible to other cables. At the back of your computer are mounting hole which you ought to ensure that they fit properly with your monitor. If you find out that it does not fit accordingly, make sure you buy an adapter plate. You can continue with the mounting process if the monitor fits properly.
Ensuring that you install the mount into the stud is the next step. If you find it difficult to get the needed stud, you can purchase a hardware kit but these will cost you more. The location where you are going to drill your first hole ought to be marked after locating the studs. For a good installation of your monitor, make the first hole on the top left. Someone is needed to help you hold the mount and level it using the reference hole drilled on the top left.
Ensure that the mount is in level and mark the other three holes on the wall. On the wall, drill holes on the points where you had marked. The monitor can be screwed to the mount on the wall after drilling the holes. The next step involves connecting your monitor to the VGA and power cords. Determining whether everything is working out by testing the monitor is the last step. By following these guidelines, you will have mounted your monitor.